Pretty Pink Posh Shop

| |

Tutorial: Striped Color Blocking

Hi everyone, Eloise here on the blog and YouTube channel today with an encouragement card using the Cherry Blossoms and Encouraging Greetings stamp sets. I’ll be doing a sort of colour blocking technique I guess, basically I’m blending on stripes of colours, and white heat embossing my images over top of the coordinating colours needed. I don’t have a good technique name, but that’s the gist what I did.

Watch the video above  I  Watch the video in HD on YouTube
 

To begin my card today, I started off with a piece of watercolour cardstock, added some tape to the back of it to hold it down onto a craft sheet and then used post it tape to mask off diagonal lines. First tip is to use post it tape, or another low tack tape. I literally went through 8 pieces of cardstock from using the wrong tape and in the end decided to just use post it tape, because that’s what worked the best. So I masked off stripes all over my background and ink blended different colour Distress Oxide inks inside each strip. Since I was using Cherry Blossoms, I basically wanted them to be pink. Generally, I would want them to be lighter, because Cherry Blossoms are a lighter pink, but I didn’t have any lighter Oxide Inks, so this is fine. I used Worn Lipstick, Picked Raspberry and Abandoned Coral for the pinks and then Twisted Citron and Lucky Clover for the green areas. Once all my stripes were ink blended, I flicked on some water to create a water splotch effect, dried it off with my heat tool and then I could stamp my images.

Once my background was dried, I used my powder tool to coat my background, so that any powder didn’t stick to places I didn’t want it too. Then, I strategically stamped out my images over the coordinating colour stripes. I made sure to stamp out my flowers on the edge of the pink sections so that there was room for the leaves to be right next to each flower. Once they were all stamped, I used white heat embossing powder, poured it over top and then heat set all my images.

For my sentiment, I decided to use the Encouraging Greetings stamp set and so I stamped the ‘You Got This’ sentiment on a strip of black cardstock and white heat embossed the sentiment. I then added foam tape to the back and adhered it on the right hand side of my card. I then added fun foam onto my panel, set it off to the side and worked on my card base.

I cut down a piece of teal cardstock at a diagonal to match my background and adhered it onto a white card base. I wanted there to be an additional colour as well as white on the card base to match my white embossing, so that’s my little way of incorporating two colours into my card base. It’s a fun design element as well. I then adhered my panel on top and used some new jewels in Watermelon, Pink Blush, Spring Green and Shamrock onto my card base as well.

So that finished up my card for today, I hope you enjoyed and got inspired and I hope you enjoyed my video as well. Thanks so much for stopping by and I’ll catch you all next time!

Eloise

 

 

| | | |

2018 Mega Sponsor Spring Blog Hop

We are excited to be part of this super fun blog hop event. We have partnered with 17 other stamp and papercraft companies to do a special blog hop and will be giving away 18 prizes to 18 lucky winners!

WHEN: Starts TODAY, April 23 and ends Friday, May 4th at midnight EST

HOW: Follow this blog and each participating sponsor in the hop. Comment at each blog stop

PRIZES: Over $550 in prizes total!

DeNami Design
Flora and Fauna
Lawn Fawn
Pretty Pink Posh << you are here
Mama Elephant
Concord and 9th
Art Impressions
Our Daily Bread Designs
Doodlebugs WA
Taylored Expressions
Reverse Confetti
Winnie and Walter
IOS Stamps
Avery Elle
Technique Tuesday
Pink and Main
Impress
Ellen Hutson LLC

Hi everyone, Eloise here and today I have a card to share with you all using the Fly A Kite Stamp Set along with showing you how to create your own pop-up box card.

Watch the video above  I  Watch the video in HD on YouTube

To begin my card I first started off with my images. I coloured these a while ago and just used them now for a card. I used Copic Markers to colour them in and then used the coordinating dies to cut them out. Once my images are ready I can begin to work on my box card.

Making these box cards are actually surprisingly easy. I first pulled a piece of blue cardstock and cut down two pieces to 5 ¼” wide and 4 ¼” tall. Out of the same blue cardstock I also cut three pieces down to 3 ½” wide and 1” tall. Once they were all cut down I could score them. For each 5 ¼” x 4 ¼” pieces I scored them at 2” and 5” on the long side, then I turned my piece 90 degrees in my scoring tool, to the short side and then scored at 2 ¼”. I repeated this step for both pieces. Then for each of the three pieces I cut, I scored each end at ¼”. So, score at ¼”, rotate 180 degrees, score at ¼” again. Once all my pieces were cut, I took them to my paper trimmer and cut down the 2” score line to the horizontal score line, and the same at the 5” score line. Then I rotated my piece 90 degrees again and cut up from the bottom to the 5” score line, cutting on the horizontal score line, just to remove the over hang. I did this to both pieces.

Now it was time to assemble the box card. I folded along all the score lines and then added a strip of adhesive on one of the flaps and adhered it to the other side of the box card. I then added strips of adhesive on each of the three long pieces and adhered one side into my card. I them removed the backers from the other side and closed the box card on top of them, this adhered both sides of the middle pieces to the inside of my box card. Then on the last flap, I added more tape and adhered that inside too. Now my box card was all ready to go.

First up I die cut down a white cardstock piece using the Stitched Borders 1 Dies and I used the little scalloped edge as a border and adhered that to the background of my box card, to make it look like white clouds. I then added strips of acetate onto the back of three of my previously stamped, coloured and die cut kites and then adhered the strings on the bottom of each too and adhered them into the middle of my card. I also adhered some clouds and a sun to the background of my card flat.

Now my images were adhered, I laid my card down flat and adhered another cloud and also stamped the sentiment ‘Let Your Dreams Soar’ in black ink onto the front of my card. At this stage my card was missing a little something so I used the same Stitched Borders 1 Dies and cut down two more small strips of white cardstock with the scalloped border and adhered those onto both side flaps of my card to finish it up completely.

I loved making this card today and I hope you enjoyed the DIY tutorial on how to make a box card without a die. Thanks so much for stopping by and I’ll catch you next time!

Eloise

|

Fly A Kite Scene + Sale

Good morning! Heather here this morning to share another Something Old, Something New card with you – the idea is to mix together both older and newer Pretty Pink Posh products – and to show you how AMAZINGLY well all of Pretty Pink Posh’s products work together!

Today’s card is a bright and happy watercolor spring scene featuring the Fly A Kite set, which is 25% off the next 3 days!

Lots of fun layers and colors – not to mention a good sprinkle of some of the fabulous jewels!

So to start off, I did some loose and messy watercoloring to create a background – nothing terribly fancy – just blue for the sky, and green for some grass or greenery at the bottom.

While that dried, I die cut a fence from white cardstock using the Picket Fence Die.

Next, we need a little bunny to hold the kite, so I stamped, die cut, and colored with Copics a cute little bunny using Bunny Friends stamps and Bunny Friends coordinating dies.

Next, stamp, color, and die cut the kite, string, and clouds using Fly a Kite stamp set and coordinating Fly a Kite Dies!

I then arranged my stamped and die cut elements into a scene that I liked…

…then used Jennifer McGuire’s trick of applying Press and Seal over the top to pick up the whole thing and…

…turn it over to apply adhesive! I added liquid glue to the fence, then used Double Sided Foam Squares and Double Sided Foam Sticky Strips for the bunny and clouds.

Then, simply pick up again with the Press and Seal, place on the watercolor background, press in place, then peal off the Press and Seal. At this point I also needed to adhere the kite to the clouds, but that was easy peasy!

Finally, it felt like my scene just needed a little something more – so I stamped, colored, and die cut a bunch of the flowers using Bunny Friends stamps and Bunny Friends coordinating dies again. I didn’t end up using all the flowers on this project, but I wanted to make sure I had plenty – and those others are saved and will probably be used on something else down the road!

For extra dimension, I adhered the tops of the flowers and greenery with Double Sided Foam Squares, then used liquid adhesive to adhere the bottom of the stems to the background. This makes it feel as if the flowers are popping right out at you!

Finished off by adding several Spring Green Jewels and Aquamarine Jewels to the background for some sparkle.

I planned on stamping a sentiment, but left everything to dry, then forgot to add a sentiment before I finished photographing the card. I’m not sure if I will add a sentiment on here or not now – it’s kind of cute as it is, and it makes it super versatile since it could be given for any occasion. What do you think – would you add the sentiment, or leave it as is?

  

Thanks so much for stopping by today! Have a wonderful day!

|

Birthday Bunnies

Hi everyone! It’s Melody here today and I have a sweet birthday card to share with you. I just love the cute bunnies in the Bunny Friends Stamp Set. I used the set in combination with the Birthday Friends Stamp Set to put together this birthday scene.

To create the background I cut a piece of watercolor paper for the card front. Using a blending tool I blended Distress Oxide Inks in Peacock Feathers, Twisted Citron, Squeezed Lemonade, and Worn Lipstick. Next I spritzed the paper with water and splashed on white paint. Once the paper had dried I die cut the half circle directly in the card front with the larger die in the Window Frames Dies.

The stamped images are colored with Copic Markers and the highlights are added with a white gel pen. I images are die cut with the Bunny Friends Coordinating Dies  and the Birthday Friends Coordinating Dies. Behind the frame I added foam tape to give dimension between the two layers.  The hill is grass is cut with the Scallop Borders 2 Dies.

The sentiment is from the Everyday Greetings Stamp Set and the card is finished off with sequins from the Sparkling Clear Confetti Mix.

Thanks for joining me today!

| | |

Creating A Card with Die Cuts + Video

I always look forward to adding colour to my projects and I challenged myself to use a colour I rarely use. It was so worth it! It’s Justine here again for an April video tutorial. I’m looking at using dies on your cards and I have a challenge for everyone – try to step out of your comfort zone! I did it twice – using green and no stamping!

Watch the video above  I  Watch the video in HD on YouTube
 

I used the Stacked Edges 2 die to create an interesting green background. I additionally added the Stitched Foliage leaves cut twice in both gold glitter paper and the green background I created with Distress Oxide inks. The sentiment, Hello Friend Script, has been cut with the same glitter gold paper and black cardstock. I topped off the card with a few clear droplets.

Thanks for having me again here on the blog. I look forward to bringing you more inspiration next month! If you enjoyed my video, be sure to check out my personal channel for weekly videos.

|

Mixing Together Sets

Hello everyone, Joni here sharing the oldie but goodie products along with some new release products as well. For this project I used the Woodland Critters, Rainy Days, and Encouraging Greetings stamp set and dies.

First, I stamped the picked images on a white cardstock and colored them with Copic Markers.

Next, I created my background using Distress Oxide. I also die-cut some green octagon border using the Stacked Edges 2 Die (which is on sale right now).

I then, splattered the background with water and diluted Mustard Seed to give interest.

I used the Encouraging Greetings stamp set for the sentiment. Then, added some Lemon Drop Jewels to finish off the card.

I hoped you enjoyed! Have a wonderful week!

|

Clean and Simple Birthday

Hello friends, Shannon here today. I have a fun clean and simple birthday card to share with you. I used the Birthday Friends stamp set along with the coordinating dies and the Storybook 6 die.

I started with an A2 sized piece of white cardstock that I die cut the Storybook 6 die in the center of, and adhered this panel onto a white card base. I ink blended my square and rectangle die cut pieces with some a few different colored inks to create a pop of color in the background and adhered them onto my card puzzling them back into the panel.

I stamped my Birthday Friends images onto some watercolor cardstock and colored them in using Zig real brush markers and a waterbrush and cut them all out using the Birthday Friends coordinating dies. I adhered all my pieces onto the card where desired and finished it off  my stamping the sentiment in the set.

That finishes off my card today! It was fairly simple cut and I love the look of color on a white card! It just pops!

Thank you so much for joining me today!!

| | |

Wild Rose Card Set + Video

Hello friends, Eloise here and today I have two cards to share with you using the Wild Rose stamp set. I LOVE florals. They make for super classy cards for almost any occasion and I think everyone needs a good floral stamp set. This one is great as it contains so many images and you can create full clusters and bouquets. I’ll also be pairing in the Thank You Script word dies since I couldn’t help but use it also! These new products are amazing!

Watch the video above  I  Watch the video in HD on YouTube

To begin my card today I wanted to try something new. I decided to pull out some Toned Tan and Toned Gray cardstock that I had in my stash from Strathmore and since it’s a mixed media paper, it can be used with watercolours. So I really wanted to try it out with my Zig Clean Color Real Brush Markers with it. I originally had purchased it to use with coloured pencils, but I didn’t have any yet so I thought watercolours would give an interesting look too. I first stamped three flowers and six leaves onto each colour of cardstock. Then I told heat embossed the images on tan paper with gold embossing powder and silver on the grey paper. I always prefer to have heat embossed images when I’m water colouring, it’s easier to contain it.

I coloured up my images the same way I colour on normal watercolour cardstock. I scribble some of my colour down where I want the darkest area to be and then with a water brush, I pull out the colour in stages into the rest of the area. This ensures a nice gradient between the colour so it looks perfectly blended. I repeated this process on all the petals and then on the leaves also and these markers blended so nicely on this paper, so super smooth and the colours blended out so well. I loved colouring with these markers on this paper I got great results and colouring on a different colour of cardstock gives it a really interesting look to it all. The colouring on the tan paper makes the colours appear more warm, and the colouring on the grey cardstock makes the colours appear more cool. Which is so interesting and gives a completely different look to these markers.

Once my colouring was completed I die cut the images out using coordinating dies. Next up, I used the Stitched Notes die set and cut into two pieces of white cardstock that measure 4″ wide by 5 1/2″ tall. This is because I want to use frame not the actual rectangle piece that it cuts. So when I lined up the die, I want it to be perfectly centered. So once I die cut those, I added foam tape onto the back and adhered them onto two card bases. For the inside of my cards, I die cut some green polka dot cardstock with the same rectangle die from Stitched Notes and adhered them flat into the card base. For my flowers and leaves, I arranged them onto the center of my card, picked them up with a little press n seal and adhered them down in stages. I used liquid adhesive for the leaves, then more foam tape for the flowers. I did this since I wanted these flowers to be placed perfectly, and once I got them places I didn’t want to loose where I had placed them.

For my sentiment, I used the ‘Hello’ from Birdie Friends and white heat embossed it twice onto a strip of black cardstock. Then I used the Thank You die set and just cut the ‘you’ word six times out of white cardstock and adhered three each together. I then adhered both sentiments onto my cards. To finish up I used the Berry Bright Sequin Mix and scattered them around the flowers.

That finishes up my cards for today, I hope you enjoyed and are inspired to try different papers to see how different mediums look on them. Thanks so much for stopping by and I’ll catch you next time.

Eloise

| |

Stamping for Autism Awareness Blog Hop

Good morning Pretty Pink Posh friends! Heather here this morning with a couple cards to share for a very special blog hop for Autism Awareness! You can find all the info on the hop HERE – what it’s all about, who’s participating, and all the sponsors of this great event!

I made two cards today featuring a variety of new and old Pretty Pink Posh products!

I created some bright happy scenes with fun sentiments, happy balloons, and pretty flowers – not to mention a few of the popular new Pretty Pink Posh jewels!

I started off with the cute little boy and girl from Birthday Friends, and stamped the bundle of balloons for them as well. I colored them up, then die cut with the coordinating Birthday Friends Dies. I die cut a couple of Stitched Speech Bubbles from black cardstock, and heat embossed sentiments on them from the new Encouraging Greetings Stamp Set (a must have!).

Next, I stamped several of the flowers and greenery from the new Bunny Friends Stamp set, and cut them out with the coordinating Bunny Friends Dies. I tried to keep the color combos well coordinated, using the same Copic colors between balloons, flowers, and clothes, then mixing them up between the cards to balance everything out.

After I planned my placement of everything, I did some Copic coloring with my Warm Gray Copics to add a ground for the scene. Next, I adhered the girl and boy and their balloons with foam adhesive, and covered the balloons with a good thick coat of Glossy Accents. Once they dried, I even added a second coat for lots of shine! You can see it best in the next two photos.

Once that all dried, I adhered the sentiment on the speech bubble with two layers of foam adhesive to pop it up above the rest, then adhered the flowers directly on the cardbase. This layering makes the scene pop just that much more! I finished off by adhering a few of the new jewels- Spring Green on the girl card, and Lemon Drop on the boy card.

I had so much fun building the scene on these! Pairing all the different sets together was so much fun – and as always, I love how well all the Pretty Pink Posh products work together!

Thanks so much for stopping by today! Have a wonderful day!

| | |

Happy Birthday Mini Shaker + Video

Hi everyone, Rina here. I am a BIG fan of shaker cards, so today I thought I would make a mini shaker birthday card.  I love this smaller size; you do not have to use too many sequins to make a huge impact.

Watch the video above  I  Watch the video in HD on YouTube

I am using the Bunny Friends, Birthday Friends and Fly Away Friends stamp sets for today’s card.  I am also using the larger Scallop Square die to create the shaker frame. I am coloring the bunny and balloon images with 4 copic markers: RV0000, RV21, RV25, RV29.

 
To create the shaker frame I cut out:

  • 1 scallop square pink frame
  • 1 solid square in acetate
  • 3 scallop30 square white frames
  • 1 solid square in pink

I adhered all these layers with Tim Holtz collage medium.  Before you adhere the solid square in pink, fill the shaker well with sequins.  I used the Friendship Mix, Mini Gold Star Confetti, Sparkling Clear Stars and 3mm Sparkling Clear Sequins.

To create the sentiment I cut out a thin piece of black paper and white heat embossed the Happy Birthday sentiment from Fly Away Friends.  I wrapped the piece around the shaker frame. Once the sentiment is in place, adhere the bunny and balloon images to the middle of the card.  To finish off the card, I accented the stamped images with Spectrum Noir Sparkle pen in Clear and adhered the new Watermelon Jewels to the outside of the shaker.

Once the card front is all complete, adhere the shaker to a 4 ¼ x 4 ¼ inch card base!

I hope you try this mini shaker out! Thanks for stopping by!

Rina