I cut my card panel using white card stock and the Stitched Notes die. I lightly ink blended some purple card ink in to the background and die the Tic-Tac-Toe die to adhere on top. I stamped my sentiment and cut out into a banner shape to adhere i the middle of my Tic-Tac-Toe area and adhered my images on as well.
Lastly I adhered my panel onto my card base and to finish off the card I scattered some 4mm and 6mm Sugar Plum sequins.
If you have missed any of our other Halloween cards, click on the photos below to see the post from that day.
That finishes my card for today! Thank you so much for joining me for Halloween theme week! Be sure to join us tomorrow for another fun post.
Hello everyone, Joni here sharing a card on how to stretch your die-cuts.
To begin first die-cut a white cardstock using Stitched Duo 3 Dies. Then die-cut the bottom using the Stitched Borders 1 Dies. Next, I added some blush on the die-cut using a round dauber.
I also added some Metallic Gold Confetti Mix for the background. The sentiment “happy halloween” was embossed with orange embossing powder and is from the Trick or Treat Friends stamp set as well as the witches’ hat. The ghost die-cut is adhered with foam tape for dimensions.
I hope I have inspired you. Thank you so much for stopping by!
Hello everyone, Eloise here and today I have two ways to use the Stitched Diamond Dies along with Distress Oxide inks. These new colours are so yummy and I just had to use them today to make a rainbow card. I have a couple other examples to show you also.
First up, I pulled some watercolour paper out and cut it into fours. Making sure that the piece was wide and tall enough to accommodate the smallest diamond die. Once all the strips had been cut, I ink blended different colours of Distress Oxide inks onto each of the pieces. At the end of it I had 14 different colours used, to create a full rainbow, but with lots of different shades of the colours.
Once all had been coloured with the oxide inks, I used the smallest diamond die from the set and cut out three diamonds from each strip of cardstock, since the strip was sometimes a little short, some of the third diamonds were missing a little of their sides, but that wasn’t an issue, they just went on the edge of the panel where it was going to be cut off anyway.
I then added foam tape behind all the diamonds and adhered it onto a panel of white cardstock, just in a random order – making sure not two similar colours were next to each other. Once everything was adhered down I went ahead and trimmed off the excess on each side with my guillotine trimmer.
For my sentiment I pulled the Birdie Friends stamp set out and used the ‘Miss You Friend’ stamp to white heat emboss on a strip of black cardstock. I then heat set the sentiment, cut the black strip at an angle on one side and adhered it onto the right hand side of my card with more foam tape. I then added a hemp cord bow to the right side also to make it more balanced.
So that finished up the first way of using these dies with these inks, I then thought of a quicker way to make the same card and design, but with stamping.
I decided to go ahead and die cut two diamonds out of some fun foam first and then adhered them to an acrylic block with double sided tape. I then took a selection of the colours of Distress Oxide inks in a more masculine colour scheme for which I used green, blue and aqua/teal and also a feminine colour scheme for which I used orange, pink and yellow and then I could stamp out the diamonds.
I inked up the foam like I normally would any stamp and then stamped down onto the card panel. It doesn’t give a perfect impression, but I really love the way it looks. Because of the stitching around the diamond, sometimes it doesn’t stamp all the way, but in the end – I still like how it turns out. When stamping, I just made sure I didn’t stamp the same colour next to each other, for it to appear more random.
Then, to clean off the foam and move onto the next colour, I just used a stamp shammy that was damp, and wiped the surface of the foam and I could easily re-use it. This is such a great way to get more from your dies, especially with simple shapes like this, but also even sentiments, I think that would be super fun to try!
Once I finished stamping down both panels with the diamonds, I finished them off the same way I did for my other cards.
I hope you enjoyed my rainbow cards today, they turned out super fun and colourful! I love rainbow cards like this and with these shape dies, the possibilities are endless for card designs.
Hello, Jeanne here. Summer and Fall are our favorite times for a camping trip! It’s time to get away from all the electronics and spend time reconnecting. I love making scenes with stamped images and today I’m playing with the Woodland Critters stamp set. It brings back wonderful memories of good times in the great outdoors.
You don’t have to be a master at water coloring to make a wonderful background. You can achieve great looks with colored card stock. I started with a panel of white card stock and then added some hills by die cutting the Scallop Borders 1 in greens. I put the darker green bushes in the background, and the lighter green “lawn” in the foreground.
Next I stamped colored and die cut the different animals and arranged them to make a scene. I wait until I am happy with their placement before I decide where to stamp the sentiment and adhere the images.
I added die cut clouds from the Rainy Days coordinating die set. Next I drew in some accents with a white gel pen…freckles on cheeks and dots on the bird’s wing.
I added a small bee from Bee Friends to land on the bear’s nose and die cut it with the coordinating die cut. The size of the bee is perfect to add as an accent with this set.
I hope you enjoyed today’s post. Thanks for stopping by the Pretty Pink Posh blog!
Hello friends! It’s Mindy from My Creative Scoop! I’m really excited to share a Copic Tutorial with you today. I’m using the stamp set Holiday Pals Stamp Set and we are going to be creating a winter scene with some snowy trees.
I stamped my images on Copic Xpress it Blending Card using Memento ink.
I used the masking technique to layer my trees. Here’s a little tutorial on how to create this look.
*If you want a closer look at any of these photos, click on the photo to enlarge it.
I always keep my masks in an envelope so I can re-use them over and over.
Let’s start coloring! I’m using G20, G82, G85, W00, W1, W3, W5. You can use whatever greens and grays you have.
Now, for the lightest parts of the tree we want to really make it look like snow. So I’ve taken my uni-ball Signo broad gel pen and colored the tips white and also created different size snow balls falling. Make sure when you do this you make some white dots on the outline of the stamp it really makes a difference with the scene.
I hope you are super inspired to create some Christmas scenes using your Pretty Pink Posh stamps!
For more Copic Marker Tutorials please visit my site!
I did some watercolor stamping here, where I used my Zig Real Brush Markers directly on the stamp and stamped it on watercolor paper for a messy watercolor look. I started by stamping the branches several times and using my water brush to move the color around a little more once stamped. I did the same process with the flowers as well and cut all the pieces out with the coordinating dies.
I then adhered my branches in a wreath shape on top of my card base that I die cut using the Stitched Notes die set, and then added my flowers on top. To finish the flowers off I added clear droplets in the middle. I found they gave the perfect touch!
It was my first time using my watercolor markers directly on my stamp and I really like the way it turned out! Thank you so very much for joining me today!!
Hi everyone, Eloise here and today I have a card for you all using the brand new Happy Turkey coordinating die set. I love using coordinating die sets without the stamp, since it stretches your supplies and opens whole new doors for using coordinating dies. I’ll be making mini shaker pockets with this die set today using a bunch of different colours of sequins!
To begin my card today I went ahead and cut down a piece of white cardstock and started cutting my leaves out. The leaves in this coordinating die set work well on their own and you can tell that they are leaves, they don’t loose much detail. I cut out the three in the centre of the cardstock and then I went ahead and die cut them from the top and bottom, so I had nine cut altogether in a grid pattern. Once they were all cut, I flipped over my panel, added a sheet of acetate and then added two foam layers around all my leaves to make them have individual sections.
I then filled each section with a different colour of sequin using various sizes also. I tried to use as many fall themed colours as possible too. Once I filled all my leaves with sequins I used another piece of white cardstock, removed the backers of the foam tape and adhered it down. Now for the sentiment, I used the Angel Friends stamp set and stamped out the banner and then used the Birdie Friends stamp set to stamp out the ‘You’re the Best’ sentiment.
To finish up my card I adhered a piece of patterned paper from Lawn Fawn to my card base and then adhered my sequin shaker panel on top. I used foam tape to adhere the sentiment and also sprinkled some of the new gold confetti mix around my card and adhered it down also.
I’m so excited to announce we are releasing another exclusive, limited edition stamp set for STAMPtember® over at Simon Says Stamp! We have been known for releasing cute stamp sets but recently, I’ve been getting requests for some elegant designs and I thought we would give that a try for this special exclusive set set called Damask Greetings.
Today we have Joni showcasing two stunning cards using this limited edition set in very unique ways. Plus, many of the PPP designers have created with it as well, so be sure to scroll down to get links to their projects!
Joni here sharing the set called Damask Greetings exclusively designed for Simon Says Stampby Pretty Pink Posh. This set is very elegant and perfect for so many occasions.
Next, I stamped one of the image from the Damask Greetings using four different color, then cut. For the sentiment, I stamped it on a black cardstock using Versamark Ink and heat embossed it with white embossing powder.
Next, I adhered the damask and sentiment with foam tape for dimensions.
For my next card, I used a different damask images to create my background, one using light yellow ink pad and the other a gray.
For my focal point, I stamped a different damask image in black to give it a bold look.
The sentiment was from the same set stamped in black. I also used one of the new Stacked Edges 1 Dies. For the little gold bow, this was die-cut from the Reindeer Friends Die set.
To finish off I adhered everything on using a foam tape and added some sequins in Lemon Meringue 4mm and 6mm.
Here a sneak peek of just a few of the projects the DT created with this set. Be sure to hop along to see their full posts!
I hope that you all love this stamp set and are inspired by the samples the design team created. A giant thank you to Simon Says Stamp for letting us be part of STAMPtember®.
NOTE: these sets are available exclusive through Simon Says Stamp and are limited edition. Hurry and get them while you can!
If you missed yesterday’s blog hop post, click here.
Suzy here with you today and we have a brand new batch of inspiration. Today I am showing off the darling Trick or Treat Friends stamp and die set. There are so many cute images in this set allowing you to create adorable Halloween scenes. I added a couple of the new stand-alone dies to this card as well.
I started the card with a black card base and a white stitched rectangle that I painted with small black watercolor dots. Next, I used the new Stacked Edges 1 Dies to create the “ground” on my card. I watercolored these pieces with black watercolor and then outlined them with a black gel pen. I attached two pieces to the bottom of the card to complete the background.
To create the scene on the front, I used the large pumpkin from the new Stitched Foliage Dies. I painted it with orange watercolors and added shading with a gel pen. I stamped all of the Trick or Treat Friends images on white cardstock with a light color ink and colored them in with Copic markers. I added details and shading with gel pens. I attached all of the images on the card background creating a cute little trick or treat scene.
I added a sentiment from the Everyday Greetings Stamp Set stamped in black ink. I used a speech bubble from the Stitched Speech Bubbles Dies for the sentiment. I outlined the stitches in the speech bubble with a black gel pen so it stood out more from the background. I added some 4mm Tangerine Sequins over the speech bubble to finish the card.
Ready to hop along and see LOTS more fabulous inspiration with this release?
PRIZES: be sure to leave comments on each stop. I’m giving away 4 $25 gift certificates to four random comments (2 winners each day) left before September 19, 2017 at 11:59 PM PST. I’ll be announcing the winners next week, so be sure to return and see if you are one of the winners!
For the first card, I stamped the images and colored them all using copic markers, and then cut the images using the coordinating die set.
I die cut a piece of fun foam using our Tic Tac Toe Die which is also from the new release. Then I made a small shaker in the center square of the tic tac toe die cut by gluing acetate films on both sides of the square and putting Metallic Gold Confetti Mix in it. I die cut a piece of white card stock with Tic Tac Toe Die again, and glued it onto the fun foam die cut.
I used a pattern paper for yellow snowy background. After putting the Tic Tac Toe frame on a background paper, I laid pieces of the reindeer friends stamp set using foam tape and I also used pieces from the Angel Friends Stamp Set.
The sentiment was heat embossed using white embossing powder on a black card stock. The final touch was adding some Sparkling Clear Sequins Mix and Metallic Gold Sequins. I used copic markers E27, YR27, YR24,YR23 and YR21 for coloring reindeers. For red colors I usually prefer combination of R39, R29,and R27.
To make a snowy hill, I cut a white card stock using Stitched Borders 2 Dies, then foam mounted it onto a patterned paper. Then I laid each stamped image here and there, and the final touch was adding some Metallic Gold Confetti Mix.
Ready to hop along and see LOTS more fabulous inspiration with this release?
PRIZES: be sure to leave comments on each stop. I’m giving away 4 $25 gift certificates to four random comments (2 winners each day) left before September 19, 2017 at 11:59 PM PST. I’ll be announcing the winners next week, so be sure to return and see if you are one of the winners!
I cut my card panel using white card stock and the Stitched Notes die. I lightly ink blended some purple card ink in to the background and die the Tic-Tac-Toe die to adhere on top. I stamped my sentiment and cut out into a banner shape to adhere i the middle of my Tic-Tac-Toe area and adhered my images on as well.
Hello everyone, Joni here sharing a card on how to stretch your die-cuts.
I added a small bee from 
